Request Information

0.750kVA, Primary 4160V (30kV BIL), Secondary 120/240V, 60Hz, 150C Rise, Copper, 200C Insulation, DG Core, with 36 inch wire Terminations, Single Phase, Step Down Dry Type Transformer (CORE & COIL). MC2147A11G05.

Unit of Measure

Technical Specs

Rated Power

 N/A 0.75 kVA

Primary Voltage

 N/A 4160 V

Secondary Voltage

 N/A 120 V240 V

Frequency

 N/A 60 Hz

Winding Material

 N/A Copper

Temperature Rise

 N/A 150 °C

Insulation Temperature

 N/A 200 °C

Standard Features

N/A

  • 25VA to 250 kVA
  • Single Phase / Three Phase
  • Standard Low & Medium Voltage Units
  • 200°C Insulation System
  • Vacuum Pressure Impregnation
  • Copper Conductors

Optional Features

N/A

  • Integrated Fuse Assemblies
  • Epoxy End Capped Coils
  • Aluminum Conductors
  • 180° or 220°C Insulation System
  • Custom Terminations

Additional Information

N/A CPTs are primarily used to supply voltage to a load. They require significantly more current when initially energized than under normal steady state operating conditions as in starter motor applications. Control Power Transformers are designed to reduce supply voltages to control circuits in switchgear. Or CPTs can be used by Original Equipment Manufacturers for their equipment to control voltage to secondary systems.

Acutran CPTs are designed and manufactured with the highest quality insulation, build using high quality grain-oriented core steel with copper conductors and all Acutran CPTs are VPI’d with UL approved varnish Acutran CPTs meet the requirements of IEEE C57.12.01.

We provide CPTs of all shapes and sizes – low or medium voltage, low run quantities with custom accessories like fuses, shields, or special terminal connections.